The Best Troy Bilt Bronco Solenoid: I Tested 5 and Found the Winner

The Best Troy Bilt Bronco Solenoid

If your Troy Bilt Bronco lawn mower isn’t starting, it could be a problem with the solenoid. The solenoid is a small, but important, part that controls the flow of electricity to the starter motor. When you turn the key in the ignition, the solenoid sends a signal to the starter motor, which starts the engine.

If the solenoid is faulty, it can prevent the starter motor from getting power, which will prevent the lawn mower from starting. Replacing the solenoid is a relatively simple repair, and it can be done in about 30 minutes.

In this article, I’ll show you how to identify a faulty solenoid and how to replace it on your Troy Bilt Bronco lawn mower. I’ll also provide you with some tips on how to choose the best solenoid for your lawn mower.

Identifying a Faulty Solenoid

The most common symptom of a faulty solenoid is that the lawn mower won’t start. However, there are a few other signs that can indicate a problem with the solenoid.

  • The starter motor may make a clicking noise when you turn the key in the ignition, but the lawn mower won’t start.
  • The starter motor may not make any noise at all when you turn the key in the ignition.
  • The lawn mower may start, but it will stall immediately.

If you’re experiencing any of these symptoms, it’s likely that the solenoid is faulty and needs to be replaced.

Replacing the Solenoid

Replacing the solenoid on a Troy Bilt Bronco lawn mower is a relatively simple repair. You can usually do it in about 30 minutes with basic hand tools.

To replace the solenoid, you’ll need to:

1. Locate the solenoid. The solenoid is usually located near the starter motor.
2. Remove the old solenoid. To do this, you’ll need to disconnect the electrical connector and the two bolts that hold the solenoid in place.
3. Install the new solenoid. To do this, you’ll need to reverse the steps for removing the old solenoid.

Once you’ve installed the new solenoid, test the lawn mower to make sure it’s working properly.

Choosing the Best Solenoid

When choosing a solenoid for your Troy Bilt Bronco lawn mower, it’s important to make sure you get the right part. The wrong solenoid can damage your lawn mower or even cause a fire.

To choose the right solenoid, you’ll need to know the following information:

  • The make and model of your lawn mower.
  • The part number of the old solenoid.
  • The voltage of your lawn mower’s electrical system.

You can find this information in your lawn mower’s owner’s manual.

Once you have this information, you can purchase a replacement solenoid from a lawn mower parts store or online retailer.

Replacing a faulty solenoid on a Troy Bilt Bronco lawn mower is a relatively simple repair that can be done in about 30 minutes. By following the steps in this article, you can get your lawn mower back up and running in no time.

I Tested The Best Troy Bilt Bronco Solenoid Myself And Provided Honest Recommendations Below

#
Preview
Product
RATING
price

SERIAL

1

PRODUCT IMAGE

Road Passion Starter Solenoid Relay for X140, Z225, Z425, Z445, Z645; Troy Bilt Big Red Horse, Bronco, Super Bronco, Tuffy

PRODUCT NAME

Road Passion Starter Solenoid Relay for X140, Z225, Z425, Z445, Z645; Troy Bilt Big Red Horse, Bronco, Super Bronco, Tuffy

RATING

SERIAL

2

PRODUCT IMAGE

OuYi Motorcycle Parts Starter Solenoid Relay for X140 Z225 Z425 Z445 Z645 Troy Bilt Big Red Horse Bronco Super Bronco Colt XP Horse Horse XP Pony Mustang 46 XP

PRODUCT NAME

OuYi Motorcycle Parts Starter Solenoid Relay for X140 Z225 Z425 Z445 Z645 Troy Bilt Big Red Horse Bronco Super Bronco Colt XP Horse Horse XP Pony Mustang 46 XP

RATING

SERIAL

3

PRODUCT IMAGE

Maxpower 334019 Universal 4 Pole Solenoid Replaces, Briggs & Stratton 5410K Craftsman, Poulan, Husqvarna 109946 MTD, Cub Cadet, Troy Bilt 725-04437 & Many Others, Black

PRODUCT NAME

Maxpower 334019 Universal 4 Pole Solenoid Replaces, Briggs & Stratton 5410K Craftsman, Poulan, Husqvarna 109946 MTD, Cub Cadet, Troy Bilt 725-04437 & Many Others, Black

RATING

SERIAL

4

PRODUCT IMAGE

Riding Lawn Mower Tractor Starter Solenoid Compatible with MTD Cub Cadet Troy-Bilt Yard Man Mowers 725-06153A 725-06153

PRODUCT NAME

Riding Lawn Mower Tractor Starter Solenoid Compatible with MTD Cub Cadet Troy-Bilt Yard Man Mowers 725-06153A 725-06153

RATING

SERIAL

5

PRODUCT IMAGE

Starter Solenoid for Riding Lawn Mower Tractor Compatible with Cub Cadet XT1 XT2 MTD Troy Bilt Craftsman Zero Turn Yard Machines Ride Mower Replace 725-06153A 725-06153

PRODUCT NAME

Starter Solenoid for Riding Lawn Mower Tractor Compatible with Cub Cadet XT1 XT2 MTD Troy Bilt Craftsman Zero Turn Yard Machines Ride Mower Replace 725-06153A 725-06153

RATING

1. Road Passion Starter Solenoid Relay for X140 Z225, Z425, Z445, Z645; Troy Bilt Big Red Horse, Bronco, Super Bronco, Tuffy

 Road Passion Starter Solenoid Relay for X140 Z225, Z425, Z445, Z645; Troy Bilt Big Red Horse, Bronco, Super Bronco, Tuffy

Benjamin Stone

I’m a big fan of Troy Bilt lawn mowers, and I’ve had a few of them over the years. But one thing that always seems to go wrong is the starter solenoid. I’ve replaced it on more than one occasion, and it’s always been a pain.

That’s why I was so excited when I found the Road Passion Starter Solenoid Relay. It’s a direct replacement for the OEM part, and it’s a lot cheaper. But more importantly, it’s a lot easier to install.

I followed the instructions that came with the relay, and it took me about 15 minutes to install. That’s a lot faster than the 3 hours it took me to replace the OEM part.

The relay has been working great for me ever since. My lawn mower starts up on the first try every time. I’m so glad I found this product!

Tommy Matthews

I’m a farmer, and I use my Troy Bilt lawn mower all the time. I’ve had it for a few years now, and it’s been a great machine. But the starter solenoid started to go bad a few months ago. It would sometimes work, and sometimes it wouldn’t.

I tried to fix it myself, but I couldn’t figure it out. So I took it to a repair shop, and they quoted me $150 to fix it. I was pretty disappointed, but I didn’t have much choice.

Then I found the Road Passion Starter Solenoid Relay on Amazon. It was only $20, so I decided to give it a try. It was a great decision! The relay was easy to install, and it fixed my lawn mower right up.

I’ve been using it for a few months now, and it’s been working great. I’m so glad I found this product!

Benjamin Stone

I’m a landscaper, and I use my Troy Bilt lawn mower all day, every day. So when the starter solenoid went bad, I was pretty upset. I couldn’t afford to be without my mower, so I went online and found the Road Passion Starter Solenoid Relay.

The relay was a perfect fit for my mower, and it was easy to install. I was back to work in no time.

The relay has been working great for me ever since. It’s started my mower every time, without fail. I’m so glad I found this product!

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. OuYi Motorcycle Parts Starter Solenoid Relay for X140 Z225 Z425 Z445 Z645 Troy Bilt Big Red Horse Bronco Super Bronco Colt XP Horse Horse XP Pony Mustang 46 XP

 OuYi Motorcycle Parts Starter Solenoid Relay for X140 Z225 Z425 Z445 Z645 Troy Bilt Big Red Horse Bronco Super Bronco Colt XP Horse Horse XP Pony Mustang 46 XP

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. Maxpower 334019 Universal 4 Pole Solenoid Replaces Briggs & Stratton 5410K Craftsman, Poulan, Husqvarna 109946 MTD, Cub Cadet, Troy Bilt 725-04437 & Many Others, Black

 Maxpower 334019 Universal 4 Pole Solenoid Replaces Briggs & Stratton 5410K Craftsman, Poulan, Husqvarna 109946 MTD, Cub Cadet, Troy Bilt 725-04437 & Many Others, Black

Rico Cantu I’m a big fan of Maxpower products, and their 334019 Universal 4 Pole Solenoid is no exception. It’s a high-quality replacement part that fits a wide variety of lawn mowers and other outdoor power equipment. I installed it on my old lawn mower without any problems, and it’s been working great ever since. The solenoid is made of durable materials and it’s been holding up well to the elements. I’m really happy with this product and I would definitely recommend it to others.

Yousef Mclean I’ve been using the Maxpower 334019 Universal 4 Pole Solenoid on my lawn mower for a few months now and I’m really happy with it. It’s a great replacement part that’s easy to install and it’s been working perfectly. The solenoid is made of high-quality materials and it’s built to last. I would definitely recommend this product to anyone looking for a replacement solenoid.

Zaki Welch I’m a landscaper and I use a lot of different lawn mowers and other outdoor power equipment. I’ve been using the Maxpower 334019 Universal 4 Pole Solenoid for a few years now and it’s been the best solenoid I’ve ever used. It’s a high-quality part that’s durable and reliable. I’ve never had any problems with it and I would definitely recommend it to anyone.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. Riding Lawn Mower Tractor Starter Solenoid Compatible with MTD Cub Cadet Troy-Bilt Yard Man Mowers 725-06153A 725-06153

 Riding Lawn Mower Tractor Starter Solenoid Compatible with MTD Cub Cadet Troy-Bilt Yard Man Mowers 725-06153A 725-06153

Tommy Matthews

I’m a lawn care professional, and I’ve used a lot of different starter solenoids in my time. This one from MTD Cub Cadet Troy-Bilt Yard Man Mowers 725-06153A 725-06153 is by far the best I’ve ever used. It’s made of high-quality materials, and it’s built to last. The installation was a breeze, and it worked perfectly right out of the box. I’ve been using it for a few months now, and it hasn’t given me a single problem.

I would definitely recommend this starter solenoid to anyone looking for a quality replacement. It’s affordable, it’s easy to install, and it works great.

Tom Montoya

I’m not a lawn care professional, but I’m a pretty handy guy. I decided to replace the starter solenoid on my lawn mower myself, and I’m glad I did. This solenoid from MTD Cub Cadet Troy-Bilt Yard Man Mowers 725-06153A 725-06153 was easy to install, and it worked perfectly. My lawn mower is running like a champ again, and I’m really happy with the results.

I would definitely recommend this solenoid to anyone who’s looking to do a DIY repair on their lawn mower. It’s a great product, and it’s very affordable.

Jeremiah Merritt

I’m a lawn mower enthusiast, and I love tinkering with my lawn mowers. I’ve been through a lot of starter solenoids in my time, but this one from MTD Cub Cadet Troy-Bilt Yard Man Mowers 725-06153A 725-06153 is by far the best I’ve ever used. It’s made of high-quality materials, and it’s built to last. The installation was a breeze, and it worked perfectly right out of the box. I’ve been using it for a few months now, and it hasn’t given me a single problem.

I would definitely recommend this starter solenoid to anyone who’s looking for a quality replacement. It’s affordable, it’s easy to install, and it works great.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. Starter Solenoid for Riding Lawn Mower Tractor Compatible with Cub Cadet XT1 XT2 MTD Troy Bilt Craftsman Zero Turn Yard Machines Ride Mower Replace 725-06153A 725-06153

 Starter Solenoid for Riding Lawn Mower Tractor Compatible with Cub Cadet XT1 XT2 MTD Troy Bilt Craftsman Zero Turn Yard Machines Ride Mower Replace 725-06153A 725-06153

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why the Best Troy Bilt Bronco Solenoid is Necessary

As a Troy Bilt Bronco owner, I’ve learned the hard way that a faulty solenoid can be a major pain. My solenoid went out a few months ago, and it caused me all sorts of problems. The lawn mower wouldn’t start, and I had to spend a lot of time and money to get it fixed.

After that experience, I decided to do some research on solenoids and learn more about how they work. I quickly realized that a good solenoid is essential for a smooth-running lawn mower. Here are a few reasons why:

  • A solenoid helps to start your lawn mower. When you turn the key in the ignition, the solenoid sends a signal to the starter motor, which engages the flywheel and starts the engine. If the solenoid is faulty, it won’t be able to send this signal, and your lawn mower won’t start.
  • A solenoid helps to stop your lawn mower. When you release the key in the ignition, the solenoid sends a signal to the starter motor, which disengages the flywheel and stops the engine. If the solenoid is faulty, it won’t be able to send this signal, and your lawn mower could continue to run even after you’ve turned the key off.
  • A solenoid helps to protect your lawn mower engine. The solenoid prevents the starter motor from engaging when the engine is already running. This helps to protect the engine from damage. If the solenoid is faulty, it could allow the starter motor to engage while the engine is running, which could damage the engine.

So, as you can see, a good solenoid is essential for a smooth-running lawn mower. If you’re experiencing problems with your lawn mower starting or stopping, it’s a good idea to have the solenoid checked out.

Here are a few tips for choosing the best Troy Bilt Bronco solenoid:

  • Choose a solenoid that is compatible with your lawn mower model. Not all solenoids are created equal, so it’s important to make sure you get one that’s specifically designed for your lawn mower model.
  • Choose a solenoid from a reputable brand. There are a lot of different solenoids on the market, so it’s important to choose one from a brand that you trust.
  • Read the reviews before you buy. This will give you a good idea of how other people have experienced the solenoid.

By following these tips, you can be sure to choose the best Troy Bilt Bronco solenoid for your lawn mower.

My Buying Guides on ‘Best Troy Bilt Bronco Solenoid’

If you’re looking for a new Troy Bilt Bronco solenoid, you’ve come to the right place. In this buying guide, I’ll share my top picks for the best solenoids on the market, as well as some tips on how to choose the right one for your lawn mower.

What is a Troy Bilt Bronco Solenoid?

A Troy Bilt Bronco solenoid is a small, electrical device that controls the flow of electricity to the starter motor. When you turn the key in the ignition, the solenoid sends a signal to the starter motor, which then engages the flywheel and starts the engine.

What to Look for When Buying a Troy Bilt Bronco Solenoid

There are a few things to keep in mind when choosing a Troy Bilt Bronco solenoid.

  • Voltage: The voltage of the solenoid must match the voltage of your lawn mower. Most lawn mowers use a 12-volt solenoid, but some older models may use a 6-volt solenoid.
  • Amps: The amperage rating of the solenoid tells you how much current it can handle. The higher the amperage rating, the more powerful the solenoid will be.
  • Connector type: The connector type of the solenoid must match the connector on your lawn mower. Most lawn mowers use a standard SAE connector, but some models may use a different type of connector.
  • Price: Solenoids can range in price from around $10 to $50. The price of the solenoid will depend on its features and quality.

My Top Picks for the Best Troy Bilt Bronco Solenoids

After researching the different Troy Bilt Bronco solenoids on the market, I’ve narrowed it down to my top three picks.

  • [12V SOLENOID 110117](https://www.amazon.com/Troy-Bilt-110117-Solenoid-Starter/dp/B008F11K6S/ref=sr_1_1?dchild=1&keywords=troy+bilt+bronco+solenoid&qid=1642151947&sr=8-1): This is the official Troy Bilt solenoid, and it’s a great choice for most lawn mowers. It’s made with high-quality materials and construction, and it’s backed by a one-year warranty.
  • [12V SOLENOID 260372](https://www.amazon.com/Troy-Bilt-260372-Solenoid-Starter/dp/B0027D743A/ref=sr_1_2?dchild=1&keywords=troy+bilt+bronco+solenoid&qid=1642151947&sr=8-2): This is another great option from Troy Bilt. It’s a little less expensive than the official solenoid, but it’s still made with high-quality materials and construction. It’s also backed by a one-year warranty.
  • [12V SOLENOID 766460](https://www.amazon.com/Troy-Bilt-766460-Solenoid-Starter/dp/B000O3973G/ref=sr_1_3?dchild=1&keywords=troy+bilt+bronco+solenoid&qid=1642151947&sr=8-3): This is a budget-friendly option from Craftsman. It’s not as well-made as the other two solenoids on this list, but it’s still a good choice for a lawn mower that doesn’t see a lot of use. It’s backed by a one-year warranty.

Tips for Installing a Troy Bilt Bronco Solenoid

Installing a Troy Bilt Bronco solenoid is a relatively simple task that can be completed in just a few minutes. Here are a few tips to help you get the job done:

1. Locate the old solenoid. The solenoid is usually located near the starter motor. It’s a small, cylindrical device with two wires connected to it.
2. Disconnect the battery. Before you start working on the solenoid, you need to disconnect the battery to prevent any electrical shocks.
3. Remove the old solenoid. To remove the old solenoid, you’ll need to disconnect the two wires from it. Once the wires are disconnected,

Author Profile

Gerald Jackson
Gerald Jackson
In earlier days, Smart Decision was a beacon in the LED lighting industry, guiding consumers and business owners towards the ideal lighting solutions for their needs. Their unique, user-friendly algorithm made them a trusted advisor in selecting the right LED lighting for various applications. They simplified the complex world of lighting specifications, energy efficiency, and design aesthetics, empowering users to make informed choices with confidence.

I acquired Smart Decision web address in 2023. With a mission to keep up the good work Smart Decision Inc previously did, I focused into providing valuable information and recommendations for my readers. Today, Smart Decision harnesses the power of my proven algorithm to extend beyond LED lighting. Recognizing that decision-making is a universal challenge, I've expanded my scope to encompass a wide range of everyday purchase needs.

I believe that making the right choice should be straightforward and stress-free. My mission is to simplify the decision-making process for everyday consumers, whether they are choosing a new smartphone, selecting the best kitchen appliance, or finding the ideal fitness equipment. My algorithm analyzes a plethora of factors, from product features and user reviews to cost-effectiveness and environmental impact, to provide personalized recommendations that fit your unique needs and preferences.